Rated contact current according to DIN EN 60669: 16 AX / 20 AX (200 µF fluorescent lamp load)

Per output

• Selectable operating mode (normal mode, time switch mode, flashing mode)
• Selectable relay mode (NC/NO)
• Variable On and Off delay times
• Two selectable logic operations (AND, OR, NAND, NOR, XOR, FILTER, TRIGGER)
• Selectable sending of status objects on request, cyclically and/or automatically after a change
• Selectable switching state on bus voltage failure
• Selectable start value of the switching object on bus voltage recovery
• Optional addition of a night mode object for time-limited switching On of the output, i.e. the illumination, at night
• Variable On period at night or time switch mode
• Selectable addition of an object to change the On period at night or time switch mode
• Selectable post-triggering (1x, 2x, 3x, 4x, 5x) of the On period in time switch mode
• Selectable warning signal prior to imminent switching-off by brief off and on switching (flashing) at night or in time switch mode and/or via an optional warning object

Per output selectable functions:

• For manual override ON
• For permanent OFF switching
• Blocking of the output
• For switching on or off in forced mode
• Counting of operating hours and threshold monitoring
• Counting of load cycles and threshold monitoring
• Integrated 8-bit scene control with up to 8 scenes per output

• Construction site function switching
• Object for monitoring of device function
• Object for targeted retrieval of status values