Mô tả

Hãng SX: Schneider

Mã Sản phẩm:

Mã: MTN6185-0319 – white, glossy
Mã: MTN6185-0325 – polar white, glossy
Mã: MTN6185-0414 – anthracite
Mã: MTN6185-0460 – aluminium

Descriptions:

Push-button with 1 to 4 operating buttons and integrated temperature sensor for room temperature measurement.
The push button allows two different operation methods: either the normal manual operation via key stroke or the touchless operation triggered by proximity. The touchless operation allows to trigger 1 function, such as toggling or calling up a scene. Both operation methods cannot be performed simultaneously on the same push-button.
In idle state, the surface of the push-button appears as a uniform plane. The labelling of the push-buttons only becomes visible via the backlit symbols after activation. For this purpose, the included prefabricated foils or the individual symbols with various icons.
The position of the operating buttons varies depending on the selected number of operating buttons.
With status indicators.
With integrated bus coupler. The bus is connected using a bus connecting terminal.

ETS device functions:
■ Behaviour and brightness of the status indicators
■ Night mode: LEDs light up with reduced brightness
■ The LEDs are only activated and the functions only become visible when approached.
■ Temperature sensor
KNX software functions:
With touchless function: toggle, switch on, switch off, call up scene
With normal manual operation there are 2 programming options:
■ Express settings: Calls up a pre-set configuration
■ Extended settings: Individual configuration

Switching, toggling, dimming (single/dual-surface), blind (single/dual-surface), pulse edges trigger 1-, 2-, 4-bit or 1-byte telegrams (distinction between short and long operation), pulse edges with 2-byte telegrams (distinction between short and long operation), 8-bit linear regulator, scene retrieval, scene saving, locking function.
Proximity function: triggered by object or sensor, sensitivity adjustment
Temperature sensor: offset setting, sending of the actual temperature in case of a deviation, cyclic sending of the actual temperature
Accessories: Dismantling protection MTN6270-0000
Foil set for KNX Push-button Pro MTN6270-0010
Note: Programmable only with ETS5.
Contents: Device with inserted prefabricated foil.
With bus connecting terminal and supporting plate.
3 prefabricated foils and 24 different individual symbols with 1 carrier foil